Traction motor Totally Explained

Everything about Traction Motor totally explained

A traction motor is a type of electric motor used to power the driving wheels of a vehicle such as a railroad locomotive, electrical multi-unit train (such as a subway or light rail vehicle train), a tram, or an automobile.

Motor types

Traditionally, these are DC series-wound motors, usually running on approximately 600 volts. The availability of high-powered semiconductors (such as thyristors and the IGBT) has now made practical the use of much simpler, higher-reliability AC induction motors known as asynchronous traction motors. Synchronous AC motors are also occasionally used, as in the French TGV.

Transmission types

Before large scale dieselization in the mid-20th century, a single large motor was often used to drive multiple driving wheels through connecting rods that were very similar to those used on steam locomotives. It is now standard practice to provide one traction motor driving each axle through a gear drive.
Usually, the traction motor is simply suspended between the truck (bogie) frame and the driven axle; this is referred to as a "nose-suspended traction motor". The problem with such an arrangement is that a portion of the motor's weight is unsprung, increasing forces on the track. Occasionally, other mounting arrangements are made. In the case of the GG1, two truck-mounted motors drove each axle through a quill drive. The "Bi-Polar" electric locomotives built by General Electric for the Milwaukee Road had gearless motors. The rotating shaft of the motor was also the axle for the wheels. In the case of the TGV power units, a motor mounted to the power unit’s frame drives each axle; a "tripod" drive allows a small amount of flexibility in the drive train allowing the trucks (bogies) to pivot. By mounting the relatively heavy traction motor directly to the power unit rather than to the truck (bogie), better dynamics are obtained allowing much-improved high-speed operation.

Rating

In diesel-electric and gas turbine-electric locomotives the horsepower rating of the traction motors is usually 81% that of the prime mover. This assumes that the electrical generator converts 90% of the engine's output into electrical energy and the traction motors convert 90% of this electrical energy back into mechanical energy. Calculation: 90% x 90% = 81%.

Cooling

Because of the high power levels involved, traction motors are almost always cooled using forced air.

Further Information

Get more info on 'Traction Motor'.

External Link Exchanges

Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:

<a href="http://traction_motor.totallyexplained.com">Traction motor Totally Explained</a>

Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned.